COMPRO NC3230 Guía de instalación descargar pdf (Pagina 11)

Compro NC3230 - Installation Guide

Installation

to the Cable/ADSL modem, please re-connect it to the Ethernet port of your net-

work hub/router.

2. Ethernet port on camera: Use a RJ-45 LAN cable to connect the Ethernet port of

the IP camera to the Ethernet port of your network hub/router.

3. Power adapter (optional accessory): Attach the power adapter to the camera’s

power connector when you are not using the camera’s PoE function. Then con-

nect the power plug to a power outlet. If you intend to use PoE (Power-over-

Ethernet) to power the camera, refer to the next section.

Connect Camera Using PoE

This camera supports PoE (Power-over-Ethernet), which allows electrical power and IP

data to be both delivered on a single Ethernet cable. The following instructions explain

how to connect your network camera using PoE.

1. Using PoE Switch: If the Ethernet ports on your network switch/router support

PoE (Power-over-Ethernet), you can directly connect the Ethernet port of the net-

work camera to the PoE port of your network switch/router to power the camera.

Midspan

(PoE Injector)

Switch

PoE Switch

(802.3af class3)

2. Using Non-PoE Switch: If you are using the camera with a non PoE capable net-

work switch/router, yet you still want to use PoE to power the camera, you need

to prepare a PoE injector (or midspan, not supplied) rst and then connect the

camera to a Non-PoE network switch through a PoE injector.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 23 24

Sin comentarios

COMPRO NC3230 Guía de instalación Pagina 11