COMPRO IP540 Manual de usuario descargar pdf (Pagina 51)

6-5Camera SettingsCamera Settings Camera Settings

Chapter 6: Conguration

Normal lighting

(Indoor lights on)

Without IR LEDs

(Indoor lights o)

With IR LEDs

(Indoor lights o)

Figure 6-4. Eect of IR LEDs

The IR light sensor allows the camera to detect the lighting condition of the environment and to turn on/

otheIRLEDsaccordingly;youcanconguretheIRlightoperationmodetobe[Auto],[AlwaysOn],[Always

O ], or [By Schedule].

Figure 6-5. IR light control

For scheduling on/o time of the IR LEDs, you can directly input the desired open and close time, and set the

repeat option to be [always] or [only during time frame]. (In this example above, the system will leave the IR

LEDs on between 19:00 to 23:00 from Monday to Friday.)

Embed Text and Image

You can embed text and/or image on 4 dierent locations on the live screen. (Upper Left, Upper Right, Lower

Left, Lower Right). To embed image, click on the Upload Image link and choose a suitable image. (Limited to

JPEG/BMP, 100x30 pixels, 128KB) To remove an embedded image, press the Clear button.

Flip Mode

Enablethisoptionwilliptheimagevertically,makingtheimagerotated180degrees.Enablethissetting

when you need to reposition your camera from standard position to ceiling mounting position.

Autoiris mode (570/570P only)

You can enable or disable auto adjustment of iris on your IP570(P). Enabling auto iris mode will disable the

exposure control.

Smart Focus

Choose [Indoor] or [Outdoor] based on the characteristics of your monitored scene. Choosing [Indoor] option

will bring about refocusing upon small changes in the scene. Choose [Outdoor] when your camera is installed

at a location overlooking a wide area and scene changes are expected.

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 89 90

Sin comentarios

COMPRO IP540 Manual de usuario Pagina 51