COMPRO IP540 Manual de usuario descargar pdf (Pagina 56)

6-10 PTZ ControlPTZ Control

Compro IP540(P) / IP570(P)

RTP

If you want to broadcast video using RTP (Real-time Transport Protocol), you can set up the port range, video/

audio address and port number here.

PTZ Control

Here you can manage your camera’s preset view points (or positions). And congure the patrol mode to let

the camera patrol the preset positions.

Figure 6-11. PTZ control page

Preset Points

Add Preset Points

Firstly use the arrow buttons to move the IP camera to the desired position. And then type the name into

the [Position Name] eld, and press the [Add] button. If you would like to set the position as preset Home

position,pleasecheck[Usethecurrentpositionas“Home”]button.TheHomepositioncanbeaccessed

on the live view page by pressing the Home button. If you want the camera to always return to home

position after a position change, check [Auto return to “Home“ position], input the period of time (between

30 to 300 seconds) in which the camera stays in the new position, and press [Save] button. Then whenever

the camera changes to a new position, it will automatically return to its Home position after this period of

time expires.

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 89 90

Sin comentarios

COMPRO IP540 Manual de usuario Pagina 56