COMPRO X800 - START UP GUIDE Especificaciones Pagina 24

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 36
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 23
24 _____________________________________________________________________________________
MAX9249
Gigabit Multimedia Serial Link
Serializer with LVDS System Interface
Both devices include a sawtooth divider to control the
spread-modulation rate. Autodetection or manual pro-
gramming of the RXCLKIN_ operation range guarantees
a spread-spectrum modulation frequency within 20kHz
to 40kHz. Additionally, manual configuration of the
sawtooth divider (SDIV, 0x03 D[5:0]) allows the user to
set a modulation frequency according to the RXCLKIN_
frequency. Always keep the modulation frequency
between 20kHz to 40kHz to ensure proper operation.
Manual Programming of the
Spread-Spectrum Divider
The modulation rate for the MAX9249 relates to the
RXCLKIN_ frequency as follows:
( )
RXCLKIN_
M
f
f 1 DRS
MOD SDIV
= +
×
where:
f
M
= Modulation frequency
DRS = DRS pin input value (0 or 1)
f
RXCLKIN_
= LVDS clock frequency
MOD = Modulation coefficient given in Table 7
SDIV = 6-bit SDIV setting, manually programmed
by the FC
To program the SDIV setting, first look up the modulation
coefficient according to the part number and desired
bus-width and spread-spectrum settings. Solve the above
equation for SDIV using the desired pixel clock and modu-
lation frequencies. If the calculated SDIV value is larger
than the maximum allowed SDIV value in Table 7, set SDIV
to the maximum value.
Sleep Mode
The MAX9249/GMSL deserializer include low-power
sleep mode to reduce power consumption on the device
not attached to the FC (the GMSL deserializer in LCD
applications and the MAX9249 in camera applications).
Set the corresponding remote IC’s SLEEP bit to 1 to initi-
ate sleep mode. The MAX9249 sleeps immediately after
Table 6. Spread-Spectrum Rate Limitations
Table 7. Modulation Coefficients and Maximum SDIV Settings
3-CHANNEL MODE
RXCLKIN_ FREQUENCY
(MHz)
4-CHANNEL MODE
RXCLKIN_ FREQUENCY
(MHz)
SERIAL LINK BIT RATE
(Mbps)
AVAILABLE SPREAD
RATES
< 33.3 < 25 < 1000 All rates available
33.3 to < 66.7 20 to < 50 1000 to < 2000 1.5%, 1.0%, 0.5%
≥ 66.7 ≥ 50 ≥ 2000 0.5%
BUS-WIDTH MODE
SPREAD-SPECTRUM
SETTING (%)
MODULATION COEFFICIENT
(DECIMAL)
SDIV UPPER LIMIT
(DECIMAL)
4-Channel
0.5 104 63
1 104 40
1.5 152 54
2 204 30
3 152 27
4 204 15
3-Channel
0.5 80 63
1 80 52
1.5 112 63
2 152 42
3 112 37
4 152 21
Vista de pagina 23
1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 35 36

Comentarios a estos manuales

Sin comentarios